|
General
Description
The TTM 57SL combines the best Rane and Serato have to offer
in a single, high performance mixer. Finally a mixer that
fully integrates mixer hardware, software and software controls
in one powerful package. The TTM 57SL combines all the performance
and features of the Rane TTM 56 with Serato Scratch LIVE software.
We didn't stop there -- we also included internal effects
with six stereo insert points.
The TTM 57SL comes with two pieces of control vinyl, two control
CDs, Scratch LIVE software and an extensive color manual.
Simultaneously:
Play
a combination of digital and analog sources.
Play up to two digital files controlled by vinyl or CD while
recording your mix.
Or, record two stereo sources when not using vinyl or CD control.
Cue analog and digital sources.
Operate standalone as a no-compromise performance mixer.
Applications
Battle / Live Performance
DJ
Night Club
Mobile DJ
Radio / Broadcast DJ
Mixtape DJ
Podcasting
Remix Project Studio / Post Production
System Requirements
The minimum operating
system requirements are either a 1 GHz Mac G4 with OSX
10.3, or a 1.5 GHz PC running Windows XP with Service
Pack 2, either with 1G of ram or more.
Versions 1.7.2 and higher include support for the Microsoft
Vista operating system. Note that we recommend Windows
XP over Vista, most notably for performance reasons.
You will be able to run XP at a lower USB buffer setting,
meaning lower latency and better performance using XP
than is achievable with Vista.
TTM 57SL Hardware Features
Two Input Buses
PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital
2
PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital
2
All analog inputs are phono or line capable
Input Gain and Left/Right Pan controls
3-band, full cut Tone controls with Kill switches
Magnetic faders for Channel Faders and Crossfader
Non-contact magnetic position sensor technology. No
travel noise - No bleed - Ever!
Independent Contour and Reverse controls
Microphone Input with Engage switch, Level control and
2-band Tone control
Three sets of Outputs, each with independent Level controls
Main Out on XLR (balanced)
Booth Out on 1/4" TRS (balanced)
Auxiliary Out on RCA (unbalanced)
Assign Program 1, Program 2 or Both to external FlexFx
loop
Internal LFO Filter and Echo Effects with six possible
insert points
Pre- or Post-channel faders for Program 1 and Program
2
Main Mix
Auxiliary Input Bus
Headphone Cue Monitor includes Cue Pan, Main Mix select
and Level
8 Channels of Streaming Audio
16 bit / 44.1 kHz Streaming Audio
Four channels from computer
Stereo source Digital 1 and Digital 2
Four channels to computer
Stereo Record 1 and Record 2
Stereo Recording
Record 1 and Record 2 may record:
Pre- or Post-channel faders for Program 1 or Program
2
Main Mix
Auxiliary Input Bus
Vinyl / CD Control Inputs
Stereo Record 1 may be used for 4-channels of control
Select Analog 1 or Analog 2 for Control Input 1
Select Analog 3 or Analog 4 for Control Input 2
Additional "soft" mixer controls used by Scratch
LIVE & internal effects
Foot switch input (Inputs on Tip and Ring; foot switch
not included)
Deck 1-2 switch
Group switch
B1 - B6 programmable switches
P1 - P2 programmable Encoders with push switches
J1 - J2 programmable Joysticks with push switches
USB firmware updates
Internal universal switching power supply (100-230 VAC)
Unit size: 13.5"H x 10"W x 4"D (34.3
cm x 25.4 cm x 10.2 cm)
Weight: 8.5 lb (3.8 kg)
Shipping Size: 7.75"H x 12.75"W x 19.25"D
(19.7 cm x 32.5 cm x 49 cm)
Weight: 12 lb (5.5 kg) |
|
